EXCELLENCE IN EFFICIENCY
The Condor 2 is our tandem and trike wing for powered flight. Its high efficiency and excellent roll and pitch stability reduces both fuel consumption and noise whilst providing an easy and fun piloting experience.
Compared to its predecessor, the Condor 2 has
- better roll stability due to flatter arc
- better pitch stability, especially no shooting on full trim
- improved fuel efficiency due to aerodynamic performance
- easier inflation, even in stronger winds
Well co-ordinated rolling behaviour
Thanks to the flatter arc, the Condor 2 is stable and well co-ordinated in roll with most trikes on the market, even at full trim.
Flawless take off and landing, every time
The Condor 2 inflates easily and progressively to naturally settle overhead. Even stronger wind launches present few problems due to the improved pitch stability. And because the profile produces a lot of lift at low airspeeds, you’ll get airborne quickly with the shortest of take-off runs.
Built to last
The materials used in the Condor 2 have been carefully selected to withstand intensive use over a long lifetime. The main canopy fabric is Myungjin 40, which was developed for optimal strength — it proved impossible to break during our load testing, even at 635kg (5.25G)!
The Condor 2 has a moderate aspect ratio with a high performance profile. This results in efficient climbing even at high wing loadings, saving fuel and keeping the noise down. In addition, the glide performance remains good throughout the speed range.
Excellent penetration and wide speed range
The profile of the Condor 2 enables excellent penetration in bumpy air and headwinds. Thanks to the long trimmers, the speed range is wide, yet it remains fully useable with a good margin of safety.
Wide weight range
The Condor has a wide weight range and a high maximum weight. This makes it suitable for trike use, in addition to foot launched PPG. The 2 available sizes cover a weight range of 110-472.5kg.
- Optimized airfoil with 3rd generation Equalized Pressure Technology (EPT)
- Thinner profile improves take-off and reduces material weight
- 10cm trimmers for greater penetration
- Long lifetime Myungjin MJ40 fabric
- Güth & Wolf 25 mm polyester riser
Upper surface: Myunjin MJ40 MF
Lower surface: Myunjin MJ40 MF
Güth & Wolf 25 mm polyester riser
Upper: Edelrid 7950 080 | Edelrid 7343 140 | 190
Middle: Edelrid 7343 140 | 230 | 280 | 420
Main: Edelrid 7343 420
|Flat area (m2)||37.00||41.15|
|Flat span (m)||14.07||14.84|
|Flat aspect ratio||5.35||5.35|
|Projected area (m2)||31.26||34.77|
|Projected span (m)||11.08||11.69|
|Projected aspect ratio||3.9||3.9|
|Number of cells||49||49|
|Glider weight (kg)||7.5||8.1|
|Certified weight range (paramotor) (kg)||110-430||130-472.5*|
|Certification (paramotor) (kg)||DGAC||DGAC|
* - if operating without a rescue system, the DGAC reduces the maximum permissible take-off weight to 450kg